Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty C (1) …
Removal Procedure Start By: A.Remove the crankshaft rear seal. Refer to Disassembly and Assembly, “Crankshaft Rear Seal – Remove”. Note: Wear sleeves are not installed…
Connecting Rod Bearing Journals Clearance between bearing and journal (new) … 0.053 ± 0.155 mm (0.0021 ± 0.0061 in) Main Bearing Journals Clearance between bearing…
Typical Example 4P4454 Crankshaft Pulley Group (1) Bolt. Tighten bolts to a torque of … 200 ± 25 N·m (150 ± 18 lb ft) 4W5429…
(1) Gear. For installation heat gear (do not use a torch) to … 316°C (600°F) (2) End play for crankshaft assembled in engine … 0.07…
Rear Crankshaft Seal Groups: “A”- Single Lip, “Dry” Applications “B”- Double Lip, “Wet” Applications Front Crankshaft Seal Refer to Disassembly And Assembly for the complete…
Removal Procedure Start By: Remove the flywheel housing. Refer to Disassembly and Assembly, “Flywheel Housing – Remove and Install”. Remove bolts (1) . Remove rear…
Removal Procedure Start By: A.Remove the camshaft. Refer to Disassembly and Assembly, “Camshaft – Remove”. Note: Note the oil hole orientation in each camshaft bearing…
Removal Procedure Start By: A.Remove the camshaft. Refer to Disassembly and Assembly, “Camshaft – Remove”. 1.Wrap the camshaft with a protective covering in order to…
Installation Procedure 1.Lubricate the camshaft and the camshaft bearings with clean engine oil. 2.Carefully install camshaft (4) and camshaft gear (1) in the engine. 3.Ensure…