Main bearings are available with smaller inside diameters than the original size bearings. These bearings are for crankshafts that have been ground. Main bearings are…
Author: sam
The connecting rod bearings fit tightly in the bore in the rod. If the bearing joints are worn, check the bore size. This can be…
The 132-4389 Piston Ring Groove Gauge Gp is available to check the top ring groove in the piston. Refer to the instruction card with the…
Table 1 Tools Needed Part Number Part Name Quantity 6V-7775 Air Pressure Gauge …
Personal injury can result from escaping fluid under pressure. If a pressure indication is shown on the indicator, push the release valve in order to…
Introduction This procedure is intended to give information on testing the water temperature regulator. Test Procedure Personal injury can result from escaping fluid under pressure.…
This engine has a pressurized cooling system. A pressurized cooling system has two advantages. The cooling system can be operated in a safe manner at…
Cooling systems that are not regularly inspected are the cause for increased engine temperatures. Make a visual inspection of the cooling system before any tests…
Above normal coolant temperatures can be caused by many conditions. Use the following procedure to determine the cause of above normal coolant temperatures: Personal injury…
When the engine is at operating temperature and the engine is using SAE 10W30 or SAE 15W40 oil, the maximum oil temperature should be 110…